Power-Save 1200 Customer in Maryland Saves 1000 KWH in One Month!

"I am pleasantly surprised! I live in Baltimore county Maryland and BGE is my supplier. Well, my bill this Feb is almost 1000 kwh less than last year and has been running consistently between 500 and 1000 kwh less since the device was installed. Way to go Power Save!...Without the device I would be paying a lot more! Thanks!" - Leighton Evans

Incredible Independent Test Results

"I must admit, I was a bit skeptical about your product, as an electrical engineer friend introduced me to Power-Save a few months ago...

While I was testing the unit, I had my friends present. I tested the product on the load side, and I found no difference in the amperage draw to my A/C unit on the circuit conductors directly from the breaker to it. At first, I was disgruntled. After settling down and thinking about what I had just done, I realized my error and clamped my Fluke meter on the mains directly behind the meter registering current draw at the line side of the load center....and BINGO!!!!

On start up, the A/C unit went up to 91 amps and leveled out at 13 without the Power-Save 1200 on. When the Power Save unit was engaged it was a draw of 35 amps and leveled out at 8.75. That pretty much blew everyone away! After that, I tested everything with a motor load in my house. I was astonished at the significant reduction in amperage.

I have had, in addition, a lot of customers complaining of bad power spikes, sags, and all kinds of irregularities from their utilities which could benefit from the unit." - John Turteltaub, San Diego